All Bearings and Belts Products / Sprockets / #35 Sprockets / Finished Bore #35 Sprockets
Finished Bore #35 Sprockets — A finished-bore #35 sprocket is bored and keyed for a shaft and runs on #35 roller chain.
Browse Finished Bore #35 Sprockets
Product listings are below. Questions sit under the listings so you can shop first.
A finished-bore #35 sprocket is bored and keyed for a shaft and runs on #35 roller chain.
What is a roller chain sprocket?
It is the toothed wheel that meshes with roller chain. This hub is finished-bore #35 only — match chain pitch (#35), tooth count, and shaft bore before you order.
What are the different types of chain sprockets?
Buyers usually split them by chain size (#35, #40, #50, and up), by bore style (finished bore vs minimum bore / taper-lock), and by hub style. This page is finished-bore #35. Other sizes live under the sprockets parent.
- Sprockets hub: /18m7/sprockets.html
How do I match a replacement #35 sprocket?
Count teeth, measure the finished bore, and confirm it is #35 chain (3/8-inch pitch). A one-tooth change changes ratio; a wrong bore will not mount.
